11 research outputs found
Hybrid 3D Localization for Visible Light Communication Systems
In this study, we investigate hybrid utilization of angle-of-arrival (AOA)
and received signal strength (RSS) information in visible light communication
(VLC) systems for 3D localization. We show that AOA-based localization method
allows the receiver to locate itself via a least squares estimator by
exploiting the directionality of light-emitting diodes (LEDs). We then prove
that when the RSS information is taken into account, the positioning accuracy
of AOA-based localization can be improved further using a weighted least
squares solution. On the other hand, when the radiation patterns of LEDs are
explicitly considered in the estimation, RSS-based localization yields highly
accurate results. In order to deal with the system of nonlinear equations for
RSS-based localization, we develop an analytical learning rule based on the
Newton-Raphson method. The non-convex structure is addressed by initializing
the learning rule based on 1) location estimates, and 2) a newly developed
method, which we refer as random report and cluster algorithm. As a benchmark,
we also derive analytical expression of the Cramer-Rao lower bound (CRLB) for
RSS-based localization, which captures any deployment scenario positioning in
3D geometry. Finally, we demonstrate the effectiveness of the proposed
solutions for a wide range of LED characteristics and orientations through
extensive computer simulations.Comment: Submitted to IEEE/OSA Journal of Lightwave Technology (10 pages, 14
figures
A Software-Defined Multi-Element VLC Architecture
In the modern era of radio frequency (RF) spectrum crunch, visible light
communication (VLC) is a recent and promising alternative technology that
operates at the visible light spectrum. Thanks to its unlicensed and large
bandwidth, VLC can deliver high throughput, better energy efficiency, and low
cost data communications. In this article, a hybrid RF/VLC architecture is
considered that can simultaneously provide light- ing and communication
coverage across a room. Considered architecture involves a novel multi-element
hemispherical bulb design, which can transmit multiple data streams over light
emitting diode (LED) modules. Simulations considering various VLC transmitter
configurations and topologies show that good link quality and high spatial
reuse can be maintained in typical indoor communication scenarios
Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries
Abstract
Background
Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres.
Methods
This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and lowâmiddle-income countries.
Results
In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of âsingle-useâ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for lowâmiddle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia.
Conclusion
This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both highâ and lowâmiddleâincome countries
Multi-Element Vlc Networks: Led Assignment, Power Control, And Optimum Combining
Visible light communications (VLCs) are a promising technology to address the spectrum crunch problem in radio frequency networks. A major advantage of VLC networks is that they can use the existing lighting infrastructure in indoor environments, which may have large number of LEDs for illumination. While LEDs used for lighting typically have limited bandwidth, presence of many LEDs can be exploited for indoor VLC networks, to serve each user by multiple LEDs for improving link quality and throughput. In this paper, LEDs are grouped and assigned to the users based on received signal strength from each LED, for which different solutions are proposed to achieve maximum throughput, proportional fairness, and quality of service. Additionally, power optimization of LEDs for a given assignment is investigated, and the Jacobian and Hessian matrices of the corresponding optimization problem are derived. Moreover, for multi-element receivers with LED grouping at the transmitter, an improved optimal combining method is proposed. This method suppresses interference caused by simultaneous data transfer of LEDs and improves the overall signal-to-interference-plus-noise-ratio by 2-5 dB. Lastly, an efficient calculation of channel response is presented to simulate multipath VLC channel with low computational complexity
A Software-Defined Multi-Element Vlc Architecture
In the modern era of RF spectrum crunch, VLC is a recent and promising alternative technology that operates at the visible light spectrum. Thanks to its unlicensed and large bandwidth, VLC can deliver high throughput, better energy efficiency, and low-cost data communications. In this article, a hybrid RF/VLC architecture is considered that can simultaneously provide lighting and communication coverage across a room. The considered architecture involves a novel multi-element hemispherical bulb design, which can transmit multiple data streams over LED modules. Simulations considering various VLC transmitter configurations and topologies show that good link quality and high spatial reuse can be maintained in typical indoor communication scenarios
AOA-based localization and tracking in multi-element VLC systems
Abstract-Visible light communication (VLC) is an emerging technology that is expected to be widely used for indoor wireless communications. Accurate localization of VLC equipment has a wide variety of applications in indoor scenarios, where GPS receivers do not work. This paper proposes a new and effective method for localization of VLC devices based solely on the con nectivity information. Due to narrow field of view characteristics of connected LEOs, angle of arrival to an access point can be estimated accurately. Exploiting such features, a least square estimator is developed for location estimation, and a Kalman filter is utilized for improving the tracking performance of a mobile device. Simulation results show that average localization accuracies on the order 0.2 meters can be achieved in various different access point topologies. Index Terms-Free space optics (FSO), Kalman filter, least squares estimator (LSE), light emitting diode (LED), optical wireless communications (OWC), tracking, visible light commu nication (VLC). I